Easy Note Holder

This has to be the easiest thing I have ever done. Here is the information:

Acrylic 4x6 frame

Fabric scraps measuring at least 5x3.5 (Stampin’ Up! Sweet Stitches is what I used here #121818)

Heat n' bond adhesive sheet

Basic Rhinestones #119246

Post-it Note Pad

Sticky Tape#104294

RSVP Pen

Iron and Ironing Board

Steps: 1. Pre-cut your fabric scrap to be about 5"x7". Cut it a little bigger and that way you can trim off the excess.

2. Cut a piece of Heat n' Bond to approximately the same size as your fabric.

3. Iron the Heat n' Bond to the back of your fabric, but do not remove the paper backing. This gives your fabric enough structure to easily slide into your frame.

4. Slide it into the frame so that the front of the fabric is showing through the front of the frame. Then you can embellish. I simply tied the fabric around the RSVP pen and added the jewels to the top and the bottom of the photo frame.  For the note pad you just simply add sticky strip to the back of the note pad and stick it to the photo frame.

Now, I know you want to make one; don't you?  To order supplies, please go to the Shop Button on the Right Hand Side on the side bar or go to www.aprilvicary.stampinup.net and click SHOP NOW at the top.  Any questions, please contact me.