Paper Crafting, Rubber Stamping, Scrapbooking, and more
3d #10 Challenge -- 3d10
Here are some basic instructions -- and links to so much more information:
Using Stickers:
1. Clean and dry the glass. Using painter's tape, mark off the area you want to etch. Attach vinyl stick-on letters and decorative tape; press hard to ensure they are attached firmly.
Using Rubber Stamps:
1. Clean and dry the glass. Using painter's tape, mark off the area you want to etch. Stamp your image using Versamark Ink and then emboss with the embossing powder that you have on hand. (Color here doesn't matter -- we're going to pull the embossed area off later).
2. Cover work surfaces (be sure to work in a well-ventilated area). Put on protective gloves and an old shirt with long sleeves. Paint an even layer of etching cream onto glass. Let stand for amount of time indicated by manufacturer's instructions.
3. Rinse with warm water in a stainless steel sink. (Avoid porcelain sinks; the cream damages glazed surfaces.) Remove embossed images with your finger nails -- they should peel right up.
Using Vinyl and an Electronic Die Cutter:
1. Create and cut your design according to your die cutter's directions onto cling vinyl.
2. Clean and dry the glass. Using painter's tape, mark off the area you want to etch. Attach vinyl; press hard to ensure that the design is attached firmly.
3. Cover work surfaces (be sure to work in a well-ventilated area). Put on protective gloves and an old shirt with long sleeves. Paint an even layer of etching cream onto glass. Let stand for amount of time indicated by manufacturer's instructions.
4. Rinse with warm water in a stainless steel sink. (Avoid porcelain sinks; the cream damages glazed surfaces.) Remove letters and tape.
Etch something and take a photo of your project. Upload it here to Paper Craft Planet and then tag it using two keywords -- 3d10 for our current challenge and also "etch" for anyone looking for etching inspiration down the road. I'd love to see what you make!
Here are some of my etched projects:
Here are some etching ideas from browsing the blogosphere
Tags: 3d, 3d10, challenges, etching
Replies to This Discussion
-
Permalink Reply by Susanna Boyd on -
Adela, you're too funny -- I hadn't even finished posting it yet :)
-
Permalink Reply by Marg Roswell on -
Where in Ontario can the etching cream be purchased
-
Permalink Reply by Susanna Boyd on
-
I live in Georgia -- so I don't know. Here is a Google link for craft stores in Canada -- http://www.shopincanada.com/Arts/Art-Supplies--Craft-Stores/
Etching cream is pretty common. I don't think Wal-mart carries it, but Michael's here in the US does, and I think Hobby Lobby does too. You can also order it online. It's really fun stuff to play with. You'll catch yourself etching all the glass in your house!
-
Permalink Reply by Amy (Tethered 2 Home) on -
Marg, I'm in Ottawa & I bought some at Michaels yesterday for Reg $20, well cheaper, 'cause I used my 40% off coupon .... love that they email you the coupons now, so you can print off when you need 'em.
-
Permalink Reply by Lyn Bernatovich on -
This is an idea gaining popularity for the craft enthusiast. I purchased a faux glass block at Hobby Lobby recently to do this very same effect. At holiday time, I've seen the block stuffed with mini white Christmas lights (also at Hobby Lobby) with an etched word like Joy with greenery surrounding it to complete a tablescape look. The overall effect is stunning! Thanks for sharing!
-
Permalink Reply by Susanna Boyd on
-
post the picture for the challenge! This sounds gorgeous!
-
Permalink Reply by Millie Dawson-Hardy on -
Ok, I tried, in fact I tried twice. Neither time was very successful so I am going to download just so you know I tried but I want to say up front that this is not my best (even decent) work. :)
Badge
Proud Sponsors
© 2010 Created by Susanna Boyd
